How to Buy Wood Engraving Machine
Woodworking engraving machine is mainly used for the processing of wood, to make it more beautiful. Woodworking engraving machine currently available on the market a wide range of uneven quality of the product price needs to be carefully selected, so choose to buy, here are five points to help you buy a wood carving machine.
First, look at the size of the woodworking engraving machine format. Customers should be based on business needs and financial situation, to choose their own woodworking engraving machine the size of the model and its power. Woodworking engraving machine for small-format 600mm × 600mm and 600mm × 900mm feed width is 700mm. The color plates of the sculpture is the basic applications of small-format woodworking engraving machine, to accept the good. And then a small engraving machine price its similar engraving color plates Panel, cumbersome and unnecessary waste. Large format woodworking engraving machine 1200mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm, 2400mm × 3000mm, wood engraving machine of the above models into the Section width in excess of 1350mm, plexiglass and PVC plate size of the market are 1300mm × 2400mm, so that several models of customer demand for large format wood engraving machine is more suitable.
Second, we must pay attention to the wood engraving machine spindle motor. The spindle motor is a key component of the woodworking engraving machine, its performance has a critical influence on the overall performance of the wood engraving machine. Machining spindle is usually divided into two categories: precision machining spindle, and power cut off the spindle.
A precision machining spindle is characterized by low noise, high speed, height, suitable for processing, in particular fine work piece, such as seals, nameplates, badges and other gifts. Such motors are usually for high-speed frequency conversion motor, less power, in 250W following.
- The drawback is less able to cut thick materials, are not cut thicker materials. Imports of valve gate.
- High-power cut off the spindle, mainly used for cutting, high-power carved, is characterized by power and cutting ability, especially for cutting Yu, three three-dimensional character, of course, can also create badges, nameplates, seals.
Third, is the choice: woodworking engraving machine control mode and speed control mode can be divided into three types:
- All the computing work to complete computer-controlled woodworking engraving machine computer is at work and can not be other typesetting work, so that waste may be solid computer misuse.
B, Control of them micro controller, controller layout, but you can not turn off the computer at the same time can work in wood engraving machine, which is actually equivalent to savings of 7 a computer, and reduce the waste caused by the misuse of the computer.
C, Using a USB port to transfer data, the system has a memory capacity of more than 32M. After saving the file, immediately completely out of the computer, turn off the computer or other typesetting. In this way greatly improves the efficiency of the engraving machine.
Fourth, we must pay attention to the rail. Large format wood engraving machine must be widened imported square rail, its load capacity and accuracy to maintain the capacity is more than 30 times the cycle guide to ensure the high quality of the wood engraving machine high-speed.
Is the accuracy of the woodworking engraving machine, small-format machine carved the 1mm Chinese characters engraved 1.5mm small printer large format wood engraving machine, woodworking engraving machine under a magnifying glass should be seen very clearly.
